Cuts & lacerations in Manufacturing
Cuts and lacerations remain a frequent challenge in manufacturing environments, often resulting from routine tasks involving sharp tools or machinery. By prioritizing proactive safety measures, small-scale operations can significantly reduce these incidents and foster a more secure workspace for every team member.
About 100% of related real accidents concentrate in these types.
Key prevention
- Mandate the use of appropriate, cut-resistant gloves that are specifically rated for the materials and tools being handled.
- Implement a rigorous maintenance schedule to ensure all cutting blades and machine guards are sharp, functional, and properly secured.
- Provide comprehensive hands-on training that emphasizes safe handling techniques and the correct way to store sharp implements when not in use.
- Design workstations to minimize awkward reaching or forced movements that increase the likelihood of accidental slips and contact with edges.
- Establish a clear reporting culture where employees are encouraged to identify and flag damaged equipment or hazardous surfaces before an injury occurs.
Related accident cases
직원은 겨울 커튼을 설치하기 위해 광산 입구 게이트에서 수직 파이프를 절단하고 있었습니다. 직원이 다음 절단 작업으로 이동하려고 했을 때 그는 방금 절단한 부분에 실수로 손을 올려 오른쪽 손바닥과 손가락에 화상을 입혔습니다.
벨트 가황장치가 컨베이어 벨트를 절단하고 있었습니다. 말을 마친 그는 칼을 주머니에 넣었다. 칼날이 완전히 들어가지 않아 다리가 잘렸습니다. 그는 사고 당시 의사에게 갈 것인지에 대해 결정을 내리지 못했습니다. 11년 4월 21일에 그가 바늘을 받았지만 작업을 놓치지 않았다는 사실을 알게 되었습니다.
EE는 기계를 수리하고 있었고, 줄이 끊어지고, 칼이 미끄러지고, 손이 잘렸습니다.
직원이 만능칼 절단 벨트를 뒤로 당기고 있었는데, 칼날이 부러지고 칼날이 왼손 손바닥을 베었습니다. 이 부상의 원인은 안전하지 않은 행동이었습니다. 규칙 준수가 요인이었고, 보호 장비를 착용하고 있었으며, 광부의 태도가 요인이 될 수 있었지만, 채굴 장비/시스템은 요인이 아니었습니다.
A worker suffered a wrist laceration requiring nine stitches while cutting a flap from a belt piece when the blade broke. The incident occurred during a cutting operation.
직원은 포장 시멘트 생산 라인의 팔레타이저에서 스트레치 후드 일부를 수리하고 있었습니다. 직원의 손에 잘린 팔레트 위에 가방을 자르는 데 사용되는 칼날입니다.
An employee sustained a laceration when a cutting tool slipped and cut their hand while they were stripping the outer jacket of a cable for repair. The injury resulted in a cut.
While cutting defective chips inside a ball mill, debris entered the employee's eye, causing injury. An investigation confirmed the debris was an embedded fragment.