Fire & explosion in Shipbuilding
Shipbuilding environments present unique fire and explosion hazards due to the concentration of flammable materials, hot work activities, and confined spaces. Prioritizing rigorous safety protocols is essential for protecting your workforce and maintaining operational continuity in your facility.
About 100% of related real accidents concentrate in these types.
Key prevention
- Implement a strict permit-to-work system for all hot work, ensuring areas are cleared of combustible debris and monitored by a dedicated fire watch.
- Maintain rigorous ventilation schedules in confined spaces to prevent the accumulation of flammable vapors or gases during welding and painting operations.
- Store all compressed gas cylinders in secure, well-ventilated areas away from heat sources and ensure they are properly labeled and upright.
- Conduct regular inspections of electrical equipment and wiring to identify and repair potential ignition sources caused by wear or environmental exposure.
- Provide comprehensive emergency response training to all personnel, ensuring everyone knows the location and operation of fire suppression equipment specific to marine environments.
Related accident cases
During welding operations, a hose on a portable welding torch broke, igniting the worker's clothing and causing abdominal burns.
A fire occurred during gas welding operations when flames were observed at the welding point, but it was quickly extinguished by on-site personnel.
A worker died in a fire while performing welding tasks in a confined space.
A worker sustained burns during welding operations when an oxygen hose ruptured, causing a fire. The incident involved exposure to flames and smoke resulting from the hose failure while using a welding torch.
A fire occurred when the rubber lining of a belt conveyor ignited due to overheating during welding operations. This incident happened during maintenance, where welding heat transferred to the conveyor belt, causing the fire.
A fire occurred during maintenance work involving welding coal augers and cutting frames and heads. The location was inaccessible for fire extinguisher use, hindering emergency response.